Gas Fire Suppression
In the face of potential electrical fires, swift and efficient action is paramount. Fire suppression systems swiftly extinguish fires by releasing a concentrated gas within designated areas
- Fully insured and accredited
- Operate all industry sectors
- Unbeatable fire safety in UK
- Competitively Priced
Call our team: 0800 027 2480
- System Design
- Installation
- Commissioning
- Maintenance
- Call out
- Support Desk
- Design
- Supply
- Installation
- Commissioning
- Maintenance
Extinguishing your risk
Found predominantly in critical spaces, such as server rooms, computer suites and communication hubs, Gas Suppression systems are the frontline defenders of your business’s continuity and safety.
We install, maintain and service all types of fire suppression systems
- Novec 1230: A colourless gas, virtually odourless and non-conductive. It extinguishes fire mainly through physical means.
- INERT IG-55: A blend of Argon and Nitrogen which is found naturally in the atmosphere. It does not contribute to global warming and does not harm the ozone layer. It is highly recommended for the protection of electrical and electronic materials.
- CO²: Characterised by its rapid and efficient penetration in the area to be protected, it does not generate residue or decompose products.
- Water Mist: Some systems use water mist as part of the new generation of clean extinguishing agents
Our Comprehensive Solutions
At FAFS Fire & Security, we specialise not only in the installation, but also the meticulous maintenance and servicing of all types of fire suppression systems. From the innovative Novec 1230, employing physical means to quench fires, to the environmentally conscious INERT IG-55, safeguarding sensitive electronic equipment without harming the ozone layer or environment, our range of solutions ensure your specific needs are met with precision.
Our Vigilant Approach
At FAFS Fire & Security, we adhere to the highest standards of safety and compliance. Our trained engineers conduct Room Integrity Tests with meticulous precision, ensuring that your system remains primed for action when every second counts. In the event of a failed test, our rapid response team swiftly addresses any deficiencies, sealing leaks and bolstering the integrity of your protective measures.
Room Integrity Testing
A Room integrity Test works by creating pressure within the room or enclosure where the Fire Suppression System has been installed. The Test then measures the integrity of the room to ensure the gas does not dissipate too quickly before being able to extinguish the fire. It will also check to ensure the room is not sealed to tightly, as this may cause internal structural damage.
What type of system requires a Room Integrity Test?
Common Systems that require a Room Integrity Test are FM200, NOVEC 1230, Co2, Inergen, IG55 and IG541.
Due to the overall characteristics of FM-200 the sealing requirements for effective retention are much more stringent than those for any of the Inert agents.
In general an enclosure protected with FM-200 needs to be sealed to reduce the leakage by at least half that allowed for the Inert Agents, this can and does have an impact on the structural sealing costs.
If an enclosure has satisfied an Integrity Test utilising Halon as the medium it will definitely satisfy the requirements for any of the inert agents resulting in no additional structural costs.
Unless the result with Halon is in excess of 12.5 minutes it will not satisfy the requirements for containing FM-200 resulting in the need for structural improvements inevitably leading to an increase in building costs.
Fully Accredited And Certified
Need help? Get in touch with our friendly team
Need help? Get in touch with our friendly team
What is the minimum retention time?
Room Integrity Testing ensures the extinguishing agent will achieve the correct concentration and maintains it for a ‘minimum retention time’ value.
The minimum retention time required under BS EN 15004-1 for all gaseous agents is 10 minutes, apart from CO² which has a minimum required retention time of 20 minutes.
The ‘retention time’ is the period that the gaseous agent should exist at an acceptable design concentration (Cmin), whilst remaining above the minimum protected height to prevent the re-ignition of a fire once it has been extinguished.
The ‘minimum protected height’ is a determined height from the base floor level to the top of any identified critical asset or risk, or as designated by the ‘responsible person’.
The ‘responsible person’ should always be consulted with, and agree the minimum protected height, regardless.
How often do I need a Room Integrity Test?
Any gas fire suppression system that protects an enclosure should have a room integrity test when it is commissioned.
It is a requirement of British Standards (ISO14520 / BS EN15004) and NFPA 2001 Code that a room integrity test is conducted on initial installation and thereafter at least annually.
It should also be performed if any modifications to the room take place.
What if the Room Fails?
If a room fails an Integrity Test, we will give you a full report detailing the areas that failed and provide a bespoke room sealing service.
Our trained Engineers will attend and locate the leakage, this may be done with the use of smoke.
Once the leakage is identified this will be sealed using specialist sealing products.
Take Action Now
Don’t wait to take action – take proactive steps to safeguard your premises and business today. Contact us now to schedule your Room Integrity Test and ensure the robust protection of your assets and personnel. At FAFS Fire & Security, we’re committed to your safety, every step of the way.
More Infomation
Read our blog post on Gas Fire Suppression Systems for more details
